Please fill out the contact form below and we will reply as soon as possible.
Identifying the areas of a separation which differ from the original design can be helpful to quantify how good a...
August 6th, 2021 130 views 0 likes
This function makes easy work of cleaning up dirty or noisy separations, particularly following colour separations done using Automatic or...
June 24th, 2021 992 views 1 likes
The Gamma Window is used to change the tones and colours within a design. It can be used in several...
April 30th, 2021 1684 views 1 likes
The Combined View in the Gamma Window displays the curves of all the active layers together in one window. This...
January 13th, 2022 205 views 0 likes
If you have created a curve that you could use on another design, it is a good idea to save...
January 13th, 2022 160 views 0 likes
Combine to Layer is a tool which gives you the control and flexibility to combine layers at different tonal percentages....
June 23rd, 2021 908 views 0 likes
To learn the basic principles of Combine to Layer, we recommend you read the 'Combine to Layer: Controlling overprinting layers'...
January 17th, 2022 175 views 0 likes
January 17th, 2022 280 views 0 likes
January 17th, 2022 293 views 0 likes
Enhance the speed and precision of image and separation rebalancing, using the combination of your Info Window and the Multi...
August 24th, 2021 483 views 0 likes
In the surfaces industry, a common finishing technique applied to production prints is the addition of a wear layer. This...
February 22nd, 2022 147 views 0 likes
This Palette is designed to create a design information offset in order to simulate natural production press misalignment. The results...
April 13th, 2022 164 views 0 likes
This Palette is designed to add an extra, solid red layer and set a simple ‘ring’ marker brush, allowing the...
April 13th, 2022 155 views 0 likes
Knowledge Base Software powered by Helpjuice