Textwerkzeug: Anwenden von Text auf Ihr Design

Hinzufügen von Text zu Designs und dem Layoutfenster


Es gibt zwei Möglichkeiten, in AVA Text zu einem Design hinzuzufügen. Sie können das Live-Text-Werkzeug oder das Auswahl aus Text-Werkzeug verwenden. Beide Tools werden im Folgenden beschrieben und jedes hat seine eigenen Funktionen und Vorteile.


Live-Text-Tool

Das Live-Text-Werkzeug wird verwendet, um Text zu einer bestimmten Ebene hinzuzufügen. Der Text kann beliebig oft auf die Ebene angewendet und anschließend erneut bearbeitet werden. Dies macht es zum perfekten Textwerkzeug, wenn Sie nicht sicher sind, ob der Text, den Sie hinzufügen, der endgültige Text ist, den Sie benötigen.

  1. Stellen Sie sicher, dass Sie nur eine Wiederholung Ihres Designs sehen, und wählen Sie dann das Textwerkzeug in der Werkzeugpalette aus oder drücken Sie T auf der Tastatur. Das Fenster mit den Textwerkzeug-Einstellungen wird geöffnet. 

  2. Aktivieren Sie die gewünschte Textebene. Dies sollte entweder eine neue Ebene oder eine vorhandene Ebene sein, die derzeit keine Informationen enthält (da das Live-Text-Tool den aktuellen Inhalt der Ebene durch den neuen Text ersetzt).
  3. Klicken Sie im Einstellungsfenster des Textwerkzeugs auf die Schaltfläche A.
  4. Ziehen Sie mit dem Cursor ein Textfeld an eine relevante Stelle in Ihrem Design.
  5. Wählen Sie im Fenster „Schriftarten“ die gewünschte Schriftart, -größe und -stil aus. Sie haben Zugriff auf alle auf Ihrem Computer verfügbaren Systemschriftarten, Schrifteffekte und Fremdsätze. Das Fenster „Schriftarten“ kann wie folgt geöffnet werden:
    • Wenn Sie die Schaltfläche „Schriftarten“ bereits zu Ihrer Symbolleiste hinzugefügt haben, klicken Sie darauf
    • Gehen Sie zu Menü Bearbeiten > Text > Schriftart > Schriftarten anzeigen 
  6. Geben Sie den erforderlichen Text ein. Die Eigenschaften von Schriftart, Stil, Effekt und Größe können an dieser Stelle geändert werden, indem Sie den gesamten Text oder einen Teil davon markieren und die ausgewählten Einstellungen im Schriftartenfenster ändern.
  7. Wenn das Textfeld vergrößert oder an eine andere Stelle verschoben werden muss, klicken Sie im Einstellungsfenster des Textwerkzeugs auf das Platzierungswerkzeug (die Schaltfläche neben dem A) und klicken Sie auf den Text im Design. Um den Text herum werden Knotenpunkte angezeigt, mit denen Sie das Feld nach Bedarf anpassen oder verschieben können. 
  8. Nachdem Sie das Textfeld angepasst haben, kann der Text erneut bearbeitet werden, indem Sie im Einstellungsfenster des Textwerkzeugs erneut auf die Schaltfläche A klicken. Klicken Sie in das Textfeld und der Cursor beginnt wieder zu blinken, sodass Sie weiteren Text hinzufügen oder vorhandenen Text ändern können.
  9. Wenn Sie den Text in einem Winkel positionieren möchten, verwenden Sie die Drehscheibe im Einstellungsfenster für das Textwerkzeug oder geben Sie einen Winkel in das Feld daneben ein, um ihn zu drehen. Text wird normalerweise um eine feste Achse in der Mitte des Textfelds gedreht, diese kann jedoch bei Bedarf auf einen anderen Drehpunkt geändert werden. Wählen Sie im Einstellungsfenster des Textwerkzeugs das Platzierungswerkzeug aus, markieren Sie das Textfeld, halten Sie ⌥ (Optionstaste) gedrückt, platzieren Sie den Cursor am neuen Drehpunkt und ziehen Sie ihn in den gewünschten Winkel. Sie werden feststellen, dass beim Ziehen eine kleine graue Linie die Drehung auf dem Design markiert und das Winkelfeld im Fenster „Textmodus“ den aktuellen Drehwinkel anzeigt.
  10. Fahren Sie mit der Bearbeitung fort, bis Sie mit dem Ergebnis zufrieden sind, und fixieren Sie dann den Text auf der Ebene, indem Sie auf die Schaltfläche „Übernehmen“ klicken.

Löschen

Hinweis : Wenn Sie beim Erstellen und Bearbeiten von Text (vor dem Anwenden auf die Ebene) zu einem anderen Werkzeug in der Werkzeugpalette wechseln, verschwindet der Text vorübergehend. Seien Sie nicht beunruhigt, denn sobald Sie erneut auf das Textwerkzeug klicken, wird der Text wieder angezeigt.

Wenn Sie möchten, können Sie mehrere Textfelder auf einer Ebene haben, vielleicht bevorzugen Sie aber auch separate Ebenen für verschiedene Textteile.

Um die Textebene in Zukunft erneut zu bearbeiten, aktivieren Sie einfach die entsprechende Ebene, wählen Sie das Textwerkzeug in der Werkzeugpalette erneut aus und wählen Sie entweder das A-Werkzeug, wenn Sie den Text, die Schriftart oder die Größe selbst ändern möchten, oder wählen Sie das Platzierungswerkzeug, wenn Sie möchten Ich möchte den Text an eine andere Stelle verschieben.

Löschen

Hinweis : Stellen Sie sicher, dass die Option „Text anzeigen“ aktiviert ist, damit Sie die neuen Änderungen, die Sie vornehmen, tatsächlich sehen können. Klicken Sie abschließend auf „Übernehmen“, um die neuen Änderungen an der Ebene erneut zu korrigieren.

Der Film

Text zum Layoutfenster hinzufügen

Adding text to the Layout Window Text can be added to any Layout Window. It can be used simply to add labels to co...

Text can be added to any Layout Window. It can be used simply to add labels to colourways or other items on the page, or to list specifications, print data or production information for example.


The Text Tool is part of the Layout Tools Palette. The standard Tools Palette changes when you are in the Layout Window to reflect the tools you can use here. This is because no editing can be done in the Layout Window. You can only recolour and the selection of tools available reflect this.

  1. Select the Text Tool from the Tools Palette.
  2. Drag a box on the page at the position where you want to add the text.
  3. Type the text needed, or if you are bringing it in from somewhere else, copy and paste it into the box.
  4. Change the font style, size and colour by highlighting the text and then clicking the Fonts button in the toolbar.
Delete

Note: If you need to change the size of the text box at any point, simply deselect it by clicking on the page and then reselect it and drag one of its selection nodes to the desired size.

Changing the fonts, style and size

Font styles and weights can be chosen from the Collections, Family and Typeface listings in the Fonts window. The size of the text can be changed by either choosing preset sizes in the Size list; using the slider bar to the right; or manually typing a point size in the Size field. 

Changes to font, style and size can be viewed in real time. If you wish to see the fonts and styles available before typing your text, a description with a visual preview can be displayed by dragging the small dot under the word Fonts in the Title bar of the Fonts window downwards, as shown below.

Delete

Note: Text must be highlighted to change any of these settings.

Changing the colour of the font

There are two ways to colour your text on the Layout Window. You can either colour from the system colour pickers, or you can colour from your existing colour files. It is important to note that when colouring from system colour pickers, AVA cannot guarantee a colour match. If you wish for your text to be colour matched, we would recommend using the latter option.

Colouring from the system pickers

Change the colour of your text by clicking on the action menu at the bottom right of the Fonts window and choose Colour. Alternatively, click on the colour wheel button at the top of the window.

There is a choice of various system colour pickers, which provide a whole spectrum of colours to choose from.

Colouring from a colour file

When text is added to the page, colours can be dragged to your text from a colour file, The Swatches Palette, or from the Layer Palette. Simply drag and drop the colour chips on to the text to recolour it.

Creating a drop shadow

Add a drop shadow to selected text using the Text Shadow function in the Fonts window. Three slider bars and a small turning disc allow the user to control the intensity, distance and angle of the shadow.

Click on the T button in the centre, at the top of the window to activate the feature. The drop shadow will appear on the selected text and can be controlled by the sliders to the right of the text shadow button. The left slider controls the intensity, the middle slider the blur and the right slider the distance from the actual text.

Delete

Note: Once you have finished entering and styling your text, click on the Select Tool in the toolbar, otherwise you will remain in Text mode and will be unable to do anything else in the Layout Window.

Editing and removing text

Existing text can be edited simply by clicking on it. The cursor will change to a pointing hand when you move over the text. A single click will highlight the text box and its nodes, so it can be moved or resized. A double click on the text will highlight the particular word your cursor was on when you double clicked.

If you wish to highlight part or all of the text in the box, simply double click anywhere in the box and the cursor will change to a standard text editing icon, allowing you to drag over the desired text to highlight it. Once highlighted, text can be edited as you wish.

Highlighted text within a text box, or indeed entire text boxes, can be copied and pasted in the usual way. Text boxes can also be duplicated in the Layout Window by clicking on them and choosing Colourway Menu > Duplicate, or clicking on the Duplicate button in the toolbar. Entire text boxes can be deleted from the page by clicking on them and pressing ⌫ (delete key) on the keyboard.

Aligning the text

You can align text within a text box to the left, right and centre as well as justified alignment.

  1. Highlight the relevant text in a text box, using the Layout Text Tool.
  2. Go to Edit Menu > Text and select the required alignment choice from the menu.

Users can also choose a different alignment for separate areas of the same text block. Simply highlight each individual section of the text block and choose an alignment option as outlined above.

Spell checking and grammar

You can activate Apple’s built in spelling and grammar tools in AVA. To do this, highlight a word or piece of text, hold down ^ (control key) on the keyboard while clicking on the text and select the desired options from the contextual menu that appears. To check spelling, go to Edit Menu > Spelling and Grammar > Check Spelling While Typing. To check grammar, go to Edit Menu > Spelling and Grammar > Check Grammar With Spelling.


Coming soon to AVA 5.9

  1. Select the Text Tool from the Tools Palette.
  2. Drag a box on the page at the position where you want to add the text.
  3. Type the text needed, or if you are bringing it in from somewhere else, copy and paste it into the box
  4. Change the font style, size and colour by highlighting the text and clicking on the new font panel at the top of the window 
Delete

Note: If you need to change the size of the text box at any point, simply deselect it by clicking on the page and then reselect it and drag one of its selection nodes to the desired size.

Changing the colour of the font

There are two ways to colour your text on the Layout Window. 

  • You can either colour from the system colour pickers by clicking the colour block in the text panel. (It is important to note that when colouring from system colour pickers, AVA cannot guarantee a colour match. If you wish for your text to be colour matched, we would recommend using the below option)


  • You can colour from your existing colour files by dragging and dropping a colour onto the text.

Editing and removing text

Existing text can be edited simply by clicking on it. The cursor will change to a pointing hand when you move over the text. A single click will highlight the text box and its nodes, so it can be moved or resized. A double click on the text will highlight the particular word your cursor was on when you double clicked.

If you wish to highlight part or all of the text in the box, simply double click anywhere in the box and the cursor will change to a standard text editing icon, allowing you to drag over the desired text to highlight it. Once highlighted, text can be edited as you wish.

Highlighted text within a text box, or indeed entire text boxes, can be copied and pasted in the usual way. Text boxes can also be duplicated in the Layout Window by clicking on them and choosing Colourway Menu > Duplicate, or clicking on the Duplicate button in the toolbar. Entire text boxes can be deleted from the page by clicking on them and pressing ⌫ (delete key) on the keyboard.

Aligning the text

You can align text within a text box to the left, right and centre as well as justified alignment.

  1. Highlight the relevant text in a text box, using the Layout Text Tool.
  2. Go to the text panel and click on your chosen alignment option.

Users can also choose a different alignment for separate areas of the same text block. Simply highlight each individual section of the text block and choose an alignment option as outlined above.

Spell checking and grammar

You can activate Apple’s built in spelling and grammar tools in AVA. To do this, highlight a word or piece of text, hold down ^ (control key) on the keyboard while clicking on the text and select the desired options from the contextual menu that appears. To check spelling, go to Edit Menu > Spelling and Grammar > Check Spelling While Typing. To check grammar, go to Edit Menu > Spelling and Grammar > Check Grammar With Spelling.

Jetzt verfügbar in AVA 5.9 – Texttool


Das Texttool wurde für AVA 5.9 erheblich aktualisiert; Es ist jetzt benutzerfreundlicher, flexibler und nützlicher!


Das Textwerkzeug verfügt jetzt über eine eigene Ebene – die sogenannte Textebene. Diese kann wie jede andere Ebene erstellt werden, indem Sie in der Ebenenpalette auf das Ebenensymbol klicken. 


 

Eine Textebene kann beliebig viele Textelemente enthalten, ihre Farbe ändern, im Überdruck angezeigt werden, gedruckt und bei Bedarf gerastert werden.

Löschen

Hinweis: Um eine Textebene zu rastern, gehen Sie zum Ebenenmenü: Rastern. Das bedeutet, dass Sie Text wie bei einer normalen 1/8-Bit-Ebene auswählen, ausrichten und füllen können

 

Mit dem Textwerkzeug Text zu Ihrem Design hinzufügen

  • Stellen Sie sicher, dass Sie nur eine Wiederholung Ihres Designs sehen, und wählen Sie dann das Textwerkzeug in der Werkzeugpalette aus oder drücken Sie T auf der Tastatur. Das Fenster mit den Textwerkzeug-Einstellungen wird geöffnet. 
  • Klicken und ziehen Sie einen rechteckigen Rahmen, der Ihren Text enthalten soll. 
  • Geben Sie den Text ein und klicken Sie dann auf eine beliebige Stelle außerhalb des Textes, um die Bearbeitung abzuschließen. 

Löschen

Hinweis: Wenn Sie versuchen, ein Textobjekt zu erstellen, ohne eine Textebene auszuwählen, wird automatisch eine neue Textebene erstellt, die das neue Objekt enthält.

 

  • Nach der Erstellung können Sie dem Objekt einen Drehwinkel und eine Tonstufe zuweisen; Es kann mit oder ohne Antialiasing gerendert werden 
  • Um ein Textobjekt zu bearbeiten, doppelklicken Sie darauf oder verwenden Sie das Kontextmenü (^-Klick), während Sie mit der Maus darüber fahren. 
  • Während Sie ein Textelement bearbeiten, wird in der Symbolleiste Ihres Dokumentfensters ein Schriftarteninspektor angezeigt, der als praktische Alternative zum Standardfenster „Schriftart“ dient. 
  • Sobald Objekte erstellt wurden, können sie verschoben, dupliziert, kopiert/eingefügt, in der Größe geändert, zugeschnitten, ausgerichtet oder auf unterschiedliche Weise angeordnet werden.
  • Textfarben können in der Ebenenpalette wie bei jeder anderen Standardebene geändert werden. 

Löschen

Hinweis : Textobjekte funktionieren nahtlos über Wiederholungsverbindungen. 

 

 

 

Was this article helpful?


Knowledge Base Software powered by Helpjuice